SPECIFICATIONS (FOUNTAINS & AERATORS)
- Unit shall be a ___HP, volt___, cycle___ phase vertical pump type fountain/aerator.
- Unit shall consist of motor assembly, heavy duty PVC shroud and heavy duty float with optional anti-fouling screen that surrounds the motor assembly.
- Motor assembly shall consist of motor housing, bronze endbell, electric motor, start/run components, seals and dielectric lubrication fluid. The motor housing shall be constructed of 16 gauge #304 stainless steel and the endbell shall be cast bronze for corrosion-free operation in either fresh or salt water. The electric motor, with matched necessary start/run components shall fit inside the motor housing, immersed in the dielectric lubricating vanish, with the shaft extending through the bronze endbell. The motor shall have stator windings with double impregnation of baked insulating varnish, and two heavy-duty ball bearings to provide support for the rotor. The motor shaft shall be #303/304 stainless steel (not plated), with motor shaft flinger to prevent sand and dirt from accumulating around the endbell. The assembly shall also contain an internal, heavy-duty, hard-faced mechanical seal with stainless steel components to keep assembly watertight, and an additional seal pressed into the bronze endbell at the shaft opening to protect against sand and dirt abrasion.
- Unit shall come complete with ____ feet of water resistant power cord.
- Heavy-duty custom brackets will attach motor housing to shroud. All stainless bolts and locking aircraft nuts are to be used.
- PVC shroud may have side ports for maximum water flow.
- Motor housing and shroud assembly for ½-HP through 2-HP units shall rest in opening of custom designed float assembly without need of further mechanical attachment, for ease of installation and removal.
- Float assemble (for ½-HP through 2-HP units) shall be formed of 15 year UV resistant ABS plastic with custom designed opening to support shroud and motor assembly. Assembly shall come complete with two (2) eye bolts and two (2) 25’ lengths of 3/8” polypropylene rope.
- The Power House Inc. is committed to providing the finest fountains/aerators available in the marketplace. As a result, Specifications are subject to change without notice.
| ADDITIONAL AERATOR SPECIFICATIONS | ||||
| MODEL: | WEIGHT: | VOLTAGE | AMPS | GPM: |
| F750DP-50' Cord | 44 lbs. |
115V 230V |
9.0 4.8 |
1050 |
| F750DP-100' Cord | 48 lbs. |
115V 230V |
9.0 4.8 |
1050 |
| F1000DP-50' Cord | 44 lbs. |
115V 230V |
8.2 4.1 |
1150 |
| F1000DP-100' Cord | 48 lbs. |
115V 230V |
8.2 4.1 |
1050 |
| ADDITIONAL FOUNTAIN SPECIFICATIONS | ||||
| MODEL: | WEIGHT: | VOLTAGE | AMPS | DIMENSIONS |
| F500F-50' Cord | 42 lbs. |
115V 230V |
7.0 3.5 |
4' High x 15' Diameter |
| F500F-100' Cord | 52 lbs. |
115V 230V |
7.0 3.5 |
4' High x 15' Diameter |
| F1000F-50' Cord | 48 lbs. |
115V 230V |
8.2 4.1 |
6' High x 21' Diameter |
| F1000F-100' Cord | 54 lbs. |
115V 230V |
8.2 4.1 |
6' High x 21' Diameter |
| FLOAT and LIGHT INFORMATION | ||
| Float | Actual 14 lbs. Ships as 30 lbs. (oversize 1) | |
| Float with Cage | Actual 24 lbs. Ships as 30 lbs. (oversize 1) | |
| Light 115V | Actual 43 lbs. Ships as 60 lbs. (oversize 1) | |
| Light 230V | Actual 43 lbs. Ships as 60 lbs. & 20 lbs. For 2nd Transformer | |